1. Log in at https://admin.tracker.com with your valid password
2. Select “Change password”
3. Enter the current password and then enter the new password twice
4. Click on “Change Password”"

1. Log in at https://admin.tracker.com using the username and password of the customer administrator user
2. Select “Users”
3. Select “Create User”
4. Select the time zone for the user
5. Enter the name and e-mail address
6. Select the desired language
7. Enter the password for the user
8. Click on “Save”

1. Go to the Administration area and on the left side select “Users”
2. Go to the user overview, and click the Edit symbol for the desired user
3. Click on the “Devices” tab
4. For the desired device, click on “Edit”
5. Enter any desired name for the device
6. Select “Allow view” and/or “Allow view (current position)” and/or “Allow administration”
7. Click on “Update”
8. Click on “Save”

1. Go to the Administration area and on the left side select “Devices”
2. Go to the device overview, and click on the Edit symbol for the desired device
3. On the "General" tab chose an icon for your device
4. On the "Map settings" tab set the desired map settings
5. On the "Description" tab enter a name for your device
6. Enter any desired name for the device
7. Click on “Save”

1. Go to Administration area and on the left side select "Usersettings"
2. Activate "Show traffic" and cklick on "Save"
3. Click on the tab "Overview"
4. Choose the desired area on the map

• red-black: traffic not moving
• ret: very traffic very slow
• yellowb: traffic slow / normal
• green: normal

1. Go to the Administration area and on the left side select “Devices”
2. Select the device overview for the Mobile Locator and click on the Edit symbol
3. Click on the “Phone Settings” tab
4. Enter the desired target number in the prescribed format Note: If you have not ordered the 7/24 Help Line option, Phone Number 1 is automatically set as the emergency number (SOS button).
5. Click on “Save” - the numbers will be active on your Mobile Locator within 5-10 Minutes

1. On the “Details view” tab, change the image size by dragging the frame
2. To follow a route, select the route and click on the Play button in the Navigation area on the left
3. The route is now followed and details are displayed on the map view

1. Go to the Administration area and on the left side select “Geofencing”
2. Click on “Create Geofencing Rule”
3. Give a name to the geofence, and add any text you like in the Description field
4. Click on “Next”
5. Go to the map and select the area in which the geofence should be set up (increase the size of the Map view)
6. Click on “Add polygon (box)”
7. Modify the polygon as desired by clicking on the thumbtacks and dragging the mouse
8. Once the polygon has been modified, click on “Next”
9. Select the device for which geofencing should be activated
10. Click on “Next”
11. Activate one or both actions (entering or exiting the area)
12. Activate “Send e-mail” and/or “Send SMS”
13. Enter the e-mail address to which a message should be sent if the borders are crossed
14. Enter the SMS number to which a message should be sent if the borders are crossed
15. Click on “Next”
16. Read the special terms and conditions, then confirm you agree by marking the check box
17. Click on “Save”"

1. Go to the Administration area and on the left side select “Additional actions”
2. Click on “Create additional action”
3. Select the “SOS Button” type, then enter a name and any desired text in the Description field
4. Click on “Next”
5. Select the device for which the SOS action should be activated
6. Click on “Next”
7. Activate “Send e-mail” and/or “Send SMS”
8. Enter the e-mail address to which a message should be sent if the SOS button is pushed
9. Enter the SMS number to which a message should be sent if the SOS button is pushed
10. Click on “Next”
11. Read the special terms and conditions, then confirm you agree by marking the check box
12. Click on “Save”

1. Go to the Administration area and on the left side select “Additional actions”
2. Click on “Create additional action”
3. Select the “Battery Status” type
4. Under “Subtype”, select the battery level that will trigger a message
5. Enter a name and add any text you like in the Description field
6. Click on “Next”
7. Select the device for which the action should be activated
8. Click on “Next”
9. Activate “Send e-mail” and/or “Send SMS”
10. Enter the e-mail address to which a message should be sent when the corresponding battery level has been reached
11. Enter the SMS number to which a message should be sent when the corresponding battery level has been reached
12. Click on “Next”
13. Read the special terms and conditions, then confirm you agree by marking the check box
14. Click on “Save”

1. Go to the Overview map tab on the Mobile Locator, go to the left side and then click on “Locate now”
2. The location service entails a fee, and the units are charged against your SMS credits
3. Read the conditions and accept them by marking the check box
4. The request for position is sent out
5. Wait roughly 5 minutes, then go to Update on the upper left side and click on the green Update button
6. The current position is displayed

1. Go to the Administration area and on the left side select “Usersettings”
2. Activate "Show events" and click on "save”
3. Create a "Geofence" around the aerea where you want to report arrivals and departures.
4. Choose "Geofencing" in the leftside navigation
5. Click on "Create Geofencing Rule" and enter a name.
6. Click on "Next"
7. Choose the area of the geofencing (see also create geofencing)
8. After having established the region click on "Next"
9. Select the device(s) that should be activated for the Geofencing
10. Click on "Next"
11. Activate one or both Actions when entering or exiting the aerea.
12. Activate "Create event"
13. Click on "Next"
14. Accept the special terms and conditions
15. Click on "Save"

1. In the Geofencing-Overview select the Geofencing and click on "Viev"
2. Choose the time period and click on Events
3. Events are listet and you can export into CSV, Excel, PDF or RTF)

Examine some of the editing possibilities in the Details view

Note:
In the “User settings” area you can activate basic settings such as logbook display, speed display and altitude display